• head_banner_01

INCONEL® alloy 600 UNS N06600/alloy600/W.Nr. 2.4816

Short Description:

INCONEL(nickel-chromium-iron) alloy 600 is a standard engineering material for applications which require resistance to corrosion and heat. The alloy also has excellent mechanical properties and presents the desirable combination of high strength and good workability. The versatility of INCONEL alloy 600 has led to its use in a variety of applications involving temperatures from cryogenic to above 2000°F(1095°C).


Product Detail

Product Tags

Chemical Composition

Alloy

element

C

Si

Mn

S

Ni

Cr

Fe

Cu

Alloy600

Min

 

 

 

 

72

14.0

6.0

 

Max

0.15

0.5

1.0

0.015

 

17.0

10.0

0.5

Mechanical Properties

Aolly Status

Tensile strength

Rm Mpa

Min

Yield strength

R P 0. 2 Mpa

Min

Elongation

A 5 %

Min

annealed

241

552

30

Physical Properties

Density g/cm3

Melting Point 

8.47

1354~1413

Standard

Rod, Bar, Wire and Forging Stock - ASTM B 166/ASME SB 166, ASTM B 564/ASME SB 564 and N-253, SAE/AMS 5665 and 5687

Plate, Sheet and Strip - ASTM B 168/ASME SB 168, ASTM B 906/ASME SB 906, ASME Code Cases 1827 and N-253,SAE/AMS 5540,

Pipe and Tube - ASTM B 167/ASME SB 167, ASTM B 163/ASME SB 163, ASTM B 516/ASME SB 516, ASTM B 517/ASME SB 517, ASTM B 751/ASME SB 751, ASTM B 775/ASME SB 775, ASTM B 829/ASME SB 829,

Other - ASTM B 366/ASME SB 366, DIN 17742, ISO 4955A, AFNOR NC15Fe

Characteristics of Inconel 600

Inconel Coating Exporters

Resistant to a wide range of corrosive media.

Virtually immune to chlorine ion stress corrosion cracking

Non-magnetic

Excellent mechanical properties

High strength and good weldability under a wide range of temperatures


  • Previous:
  • Next:

  • Write your message here and send it to us

    Related products

    • INCONEL® alloy 601 UNS N06601/W.Nr. 2.4851

      INCONEL® alloy 601 UNS N06601/W.Nr. 2.4851

      INCONEL nickel-chromium-iron alloy 601 is a general-purpose engineering material for applications that require resistance to heat and corrosion. An outstanding characteristic of INCONEL alloy 601 is its resistance to high temperature oxidation. The alloy also has good resistance to aqueous corrosion, has high mechanical strength, and is readily formed, machined and welded. Further enhanced by the aluminum content.

    • INCONEL® alloy 625 UNS N06625/W.Nr. 2.4856

      INCONEL® alloy 625 UNS N06625/W.Nr. 2.4856

      INCONEL nickel-chromium alloy 625 is used for its high strength, excellent fabricability (including joining), and outstanding corrosion resistance. Service temperatures range from cryogenic to 1800°F (982°C). The properties of INCONEL alloy 625 that make it an excellent choice for sea-water applications are freedom from local attack (pitting and crevice corrosion), high corrosion-fatigue strength, high tensile strength, and resistance to chloride-ion stress-corrosion cracking.

    • INCONEL® alloy x-750 UNS N07750/W. Nr. 2.4669

      INCONEL® alloy x-750 UNS N07750/W. Nr. 2.4669

      INCONEL alloy X-750 (UNS N07750) is a precipitation-hardenable nickel-chromium alloy used for its corrosion and oxidation resistance and high strength at temperatures to 1300 oF. Although much of the effect of precipitation hardening is lost with increasing temperature over 1300 oF, heat-treated material has useful strength up to 1800oF. Alloy X-750 also has excellent properties down to cryogenic temperatures.

    • INCONEL® alloy 718 UNS N07718/W.Nr. 2.4668

      INCONEL® alloy 718 UNS N07718/W.Nr. 2.4668

      INCONEL 718(UNS N07718) is a high-strength corrosion resistant nickel chromium material. The age-hardenable alloy can be readily fabricated. even into complex parts. Its welding characteristics. especially its resistance to post weld cracking, are outstanding. The ease and economy with which INCONEL alloy 718 can be fabricated, combined with good tensile, fatigue creep, and rupture strength, have resulted in its use in a wide range of applications. Examples of these are components for liquid fueled rockets, rings, casings and various formed sheet metal parts for aircraft and land-based gas turbine engines, and cryogenic tankage. It is also used for fasteners and instrumentation parts.

    • INCONEL® alloy 690 UNS N06690/W. Nr. 2.4642

      INCONEL® alloy 690 UNS N06690/W. Nr. 2.4642

      INCONEL 690 (UNS N06690) is a high-chromium nickel alloy having excellent resistance to many corrosive aqueous media and high temperature atmospheres. In addition to its corrosion resistance, alloy 690 has high strength, good metallurgical stability, and favorable fabrication characteristics.