English
  • head_banner_01

Monel k-500 UNS N05500/ W.Nr. 2.4375

Monel k-500 UNS N05500/ W.Nr. 2.4375 Featured Image
  • Monel k-500 UNS N05500/ W.Nr. 2.4375

Short Description:

MONEL alloy K-500 (UNS N05500) is a nickel-copper alloy which combines the excellent corrosion resistance of MONEL alloy 400 with the added advantages of greater strength and hardness. The increased properties are obtained by adding aluminum and titanium to the nickel-copper base, and by heating under controlled conditions so that submicroscopic particles of Ni3 (Ti, Al) are precipitated throughout the matrix. The thermal processing used to effect precipitation is commonly called age hardening or aging.


Product Detail

Product Tags

Chemical Composition

Alloy

element

C

Si

Mn

S

Ni

Cr

Al

Ti

Fe

Cu

Monel K500

Min

 

 

 

 

63.0

 

2.3

0.35

 

27.0

Max

0.25

0.5

1.5

0.01

 

 

3.15

0.85

2.0

33.0

Mechanical Properties

Alloy Status

Tensile strength Rm Mpa

annealed

645

Solution& precipitation

1052

Physical Properties

Density g/cm3 Melting Point ℃
8.44 1315~1350

Standard

Rod, Bar, Wire and Forging Stock - ASTM B 865 (Rod and Bar)

Plate, Sheet and Strip - BS3072NA18 (Sheet and Plate), BS3073NA18 (Strip),

Pipe & Tube - BS3074NA18

Characteristics of Monel K500

● Corrosion resistance in an extensive range of marine and chemical environments. From pure water to non-oxidizing mineral acids, salts and alkalis.

● Excellent resistance to high velocity sea water

● Resistant to a sour-gas environment

● Excellent mechanical properties from sub-zero temperatures up to about 480C

● Non-magnetic alloy

  • Previous:
  • Next:
    • Write your message here and send it to us

    Related products

    • Monel 400 UNS N04400/ W.Nr. 2.4360 and 2.4361

      Monel 400 UNS N04400/ W.Nr. 2.4360 and 2.4361

      MONEL nickel-copper alloy 400 (UNS N04400) is a solid-solution alloy that can be hardened only by cold working. It has high strength and toughness over a wide temperature range and excellent resistance to many corrosive environments. Alloy 400 is widely used in many fields, especially marine and chemical processing. Typical applications are valves and pumps; pump and propeller shafts; marine fixtures and fasteners; electrical and electronic components; springs; chemical processing equipment; gasoline and fresh water tanks; crude petroleum stills, process vessels and piping; boiler feed water heaters and other heat exchangers; and deaerating heaters.

      See more products >
    Hit enter to search or ESC to close